Search

[Mikeypr]

I have just got my DSONE, and have put latest Firmware & Software onto it.

I am trying to set up the display for small Icons but every time I reset the icons go back to normal size.

I am also trying to turn off cirtain options in the patch menu but even after setting and saving them, when I come back to the game the patch settings are back to how they were.

One last thing.  checked the MemoryCard speed, and it says to set it to 25. But everytime I do a reboot, it's back to 3 again.

I'm using a Kingsoton 2gig (Jap) Micro Sd

ALL SAVE GAMES WORK FINE.

Any Help Appriciated.

Mikey

[dragon_boy_y3k]

press Y until you like the icon then go to OPTION and 'save menu option'

[Mikeypr]

Hi'a

Thanks for the reply.

Have found the menu I like, but how do I save the option.

I have gon in to OTHER / Then down to Save menu option.  But what key do I pres to select the option.

If I press right, it drops out of the meny. If I press A it starts the game.

Thanks For The Help.

Mike

[Mikeypr]

Hi'a

The menu is on the TOP screen so there is no way of taping it with my stylus.

I an use the L/R key and the direction pad, and change the options. It's just that they reset when I reboot the DS.

Save games are all working fine.

I'm ripping my hair out.

Mike

[Mikeypr]

Done exactly what you have said, Swapped screen... That worked. Changed settings. Seemed to work. 

But when I went to save, Nothing. Just back to how it was, with selection screen back at top.

I'm going to try a smaller memory card, then reflash the DSone.

I think I may have a Duff Card.

Mikey

[Mikeypr]

Just downloaded the latest OS, and firmware 1.01

All goes as you say, byt does not save.

One last try will drom the firmware back to 1.0 if I can find it.

Then try and find out how to contact the SuperCard Team.

I bet I bought a Fake (Just my luck) My DSONEs plastic shel is WHITE. But it came with full packaging.

Thanks For Your Help

Mikey

[jmr]

so are you just trying to got the selection screen to save to the botton??
if so you have to do it in the globel.ini

; 1.2 FileSelectSubScreen = [0|1] (Default = 1)

; Defines which screen is used to display FileBrowser.
; 0 = touchscreen (lower screen)
; 1 = normal screen (upper screen)

; �'t�'@�'C�'‹�'Š�'X�'g�'E�'B�'“�'h�'E‚ð•\Ž¦‚·‚é�'p�'l�'‹‚ð�'�'C�'“‚Æ�'T�'u‚©‚ç‘I‘ð‚µ‚Ü‚·B
; 0=�'^�'b�'`�'p�'l�'‹(‰º‰æ�"Ê), 1=’ʏí‰æ�"Ê(ã‰æ�"Ê)

FileSelectSubScreen=1 <---Change this to a 0

[Mikeypr]

Hi Jmr

Nothing is saving from the menu.

ICON Size,
Memory Speed.
Everything

As Soon as I reset it's all back to how it was in the first place.

Mikey

[jmr]

you can do it all in your globel.ini then just go through it & change it there

[Mikeypr]

I may have to do that.

But now I wonder if the card is either faulty or a fake?

Will try and set up the setting manualy for now.

Thanks

Mikey

[dragon_boy_y3k]

hold L+R to check if your ds one is faulty

[Mikeypr]

All system checks work fine.

No problems.

Perhaps it's the micro firmware 1.1? Any idea where I can find 1.0 again?

Thanks

Mikey

[meangreenie]

could the global.ini be 'read only' ?  or maybe windows indexing service is turned off, that can do starnge stuff, but i wouldn'y of thought it would affect a mem card.. maybe worth a check though

[Mikeypr]

Have been into properties and checked. Al that was ticked was Archived. And unticked that.

I'm really at a loss. Really think It may be a fake, as it's white.

Will post under another subject heading later.

Perhaps Roman will see it.

I can't make head or tail of his email address, on the supecard home page. Spaces in the addresses.

Cheers

Mikey