• Welcome to SCdev.org. Please log in.

Welcome to the new SCdev forums!

Can someone confirm?

Started by Kudaku, November 28, 2005, 09:43:27 PM

Previous topic - Next topic

Kudaku

I just need to get a few info straight before i start this whole wifi me thing
i put together what i think is right can someone just look through it and correct anything thats wrong:

rt2560_driver_1_0_0_8
^is wifi me

1 put flash me on SD card
2 put super pass and supercard in DS
3 run flash me on DS
4 Open the battery lid, remove the square white/pink sticker from the hole indicated by the arrow in the picture below and make contact between the two SL1 pads by putting a solid metal object in the hole. You could use a screw or screwdriver for example.

DO NOT SWITCH OFF OR REMOVE BATTERY UNTIL IT IS FINISHED! The process is only PAUSED when SL1 contact is lost.
Please do not remove the battery or touch the other two holes!

4 Once malware hits your DS you will have to 'reinstall' FlashMe using a GBA cartridge or using the ppflash utility


Flash ME
allows you to start code in DS mode from a flash card in the GBA slot

^for NDS homebrew

Wifi ME
a custom driver

^ to play DS games (commercial?) with out superpass or passme

If you try to boot homebrew using this method without FlashMe, you'll get a garbled Nintendo logo. (shouldn't be a problem if you have Flash me installed)

EuGoR

lashme ---- v5
Supercard Compact Flash
Always newest firmware and patcher

jerryyyy
oregon
2191-0404-8807   PM me if you add me and I'll add you

Gates: OPEN

Kudaku

Thanks you very much just wanted a confirmation