Moonshell v1.4 [Stable]

dtmoore555 · September 01, 2006, 10:59:09 AM

can anyone of u load the rom when setting up the NEW v1.4 STABLE version of Moonshell???

I have the SC SD and none of the SC stuff is able to be installed...

dustin

onekelly · September 01, 2006, 11:21:06 AM

You can get it from the source at the top of the page

http://mdxonline.dyndns.org/archives/nds/

Red XIII · September 01, 2006, 02:01:15 PM

Quote from: "dtmoore555"can anyone of u load the rom when setting up the NEW v1.4 STABLE version of Moonshell???

I have the SC SD and none of the SC stuff is able to be installed...

dustin

Same problem here too,weird.

Madrigal · September 01, 2006, 02:18:17 PM

No workie SC MiniSD. Crashes every time during bootup.

TriNiTY · September 01, 2006, 02:23:02 PM

dno what´s your problem but here you can read mine one (http://scdev.org/forum/viewtopic.php?t=5685). I can´t undertake anything against my stupidity,:lol: so please upload a stable version for us.

Red XIII · September 01, 2006, 02:33:36 PM

Quote from: "Madrigal"No workie SC MiniSD. Crashes every time during bootup.

How the heck can you even tick your .nds file?? Both 3 SC drivers are grayed out.

I can only assume that the stable version broke sc support,so he updated it with a non-sc setup version. Sucks!

onekelly · September 01, 2006, 02:54:08 PM

Red XIII, I agree with your post here and on gbadev. reading the sc support posts are very confusing. After my post above I tried to install and the same thing happened to me. I hate to say but not so 'stable' yet, at least for SC.

onekelly · September 02, 2006, 12:07:14 AM

This just posted on gbadev from xtreme

"I added the missing files. / Updated the package.
There are floating cloned SuperCard carts that are not supported with MoonShell. Please use only with REAL SuperCard.

How to identify the real one: http://eng.supercard.cn/

You need to copy the right file from the "files for SuperCard" folder to your card.
The files will be in the Setup on later releases."

here is the link to the above post http://forum.gbadev.org/viewtopic.php?t=10763&postdays=0&postorder=asc&start=0

Below is the file info on the first post on changes and download.

MoonShell v1.4 (stable) Full package (uncompressed size 22.3 MB) updated: 2006/09/02
Download http://www.samipupu.com/upload/Guest/moonshell14_full.7z (7-Zip file) 9.85 MB
Includes:
* MoonShell v1.4 (stable)
* Video encoding tools (DPGTools v1.1 - Multilanguage)
* Missing SuperCard files added
* Readme files: English, Finnish, Japanese
MD5 checksum: d97b8dfe15370d3f8c09015cf674a3d5

Animator · September 02, 2006, 04:51:24 AM

I'm a bit confused now. Is all we need to do, copy the supercard file over to the supercard as this file is smaller then the file created by the setup. There is no shell folder for the supercard specifically either so would you just keep the old one or use the other flash cart one? greatly appreciated if someone could clear this up for me.

rorix_bladewing5 · September 02, 2006, 06:43:20 AM

Are there any archives available that aren't 7z? WinRAR can't unzip the 7z version of moonshell...

Red XIII · September 02, 2006, 06:49:09 AM

What are you talking about? WinRar unzips 7z just fine.

Anyway,try this too:

http://www.7-zip.org/

zektor · September 02, 2006, 09:54:51 AM

Maybe a very OLD copy of WinRAR cannot, but my v3.41 here works with 7z...

zektor · September 02, 2006, 01:27:17 PM

This does not seem very "Stable". It consistently locks up on my DPG videos...the same exact videos that run flawlessly on v1.32. They lock up about 20 seconds into the film. Is there something about this version that I should know??

onekelly · September 02, 2006, 01:37:12 PM

To zektor, on my daughters phat ds (havent tried my sclite yet) it ran fine with no lockups. I will try it as soon as I can on the dslite/sclite.

to the winrar issue, I had an old copy would not do 7z but the newest release does.

To Animator, you make the shell file with the setup, copy that and the sc file to the SD card.

On another note zektor, have you seen the layout of the new dpgtools 1.1, a little different, better i say. due to the ability to drag and drop. but have not tried it out. Anyone know what improvements were made to it.

zektor · September 02, 2006, 01:46:24 PM

It could be a possibility that BatchDPG (what I used previously to make my encodings) is not compatible with the latest Moonshell? Like I said, I have tested the movie over and over in 1.4, and it locks up at the exact moment. On v1.32, it does not and plays fine. Hmmm....

I'll re-encode with the new dpgtools and see if that makes a difference.