Search

[Tsukasa.Hack]

Hi!
I have a Supercard DS One (in Slot1) and a Supercard Lite (in Slot2) "All last updateds"
I use Micro SD kingston 2gb "jap" and have Nitendo DS Lite

My problem is when i try to play with a GBA game, it is selected, then screen appears logo GBA and then the screen goes blank "or apear a message: The Save data are corrupted" and doesn't work any GBA game.
I tried to do this in several ways, load it directly with the "A" button and also with "X" following the instructions on the page.
We've tried selecting the "Enable GBA Union" and the same thing happens.
I have also tried to put a second micro SD in slot2 "Supercard Lite" but neither works

The Supercarl Lite (Slot 2) is right and it works, I've never had trouble playing the right way at all GBA games until I put the Supercard DS one
When I press L + B i can Boot slot 2 GBA card correctly
L+R Turn on Power to enter self test mode= It's all OK
The GBA Roms are not patched, are clean 100%

Thank you very much for everything.

PD: Sorry for my bad english

[onekelly]

Tsukasa.Hack , welcome to scdev!

Just so you know the gba roms have to be patched to be used in the SClite. You need to run them thru the patching software and all will be good.

Edit: i re-read your post and you used to have the roms work clean unpatched in the sclite prior to the scds1 being in your dslite? (you also know that a scds1 cannot play gba roms)

[Tsukasa.Hack]

Thank you for your reply 

When I was the only SC Lite always need to patch the GBA roms to make them work but when i buy the SC Ds One in the shop and people told me that they no longer have a need to patch with the two cards combined.

Anyway, when patching the GBA roms with the software of Supercard Lite for windows, then save files in Micro SD, inserted inside the slot1 "One SC Ds" and when I try to play get the logo with garbage GBA graphics below in the word of "Nintendo" and not loading roms, it is the same, or stays the blank screen or a message that says: "Your Saved data is corrupt"

No patched GBA Roms: Logo and black screen or menssage. 
Patched GBA Roms: Logo with garbage in "nintendo" word and them black screen or menssage. 

Thank you very much!

[jmr]

if your trying to boot GBA roms from your scdsone to your sclite you do NOT patch your roms with the supercard patcher you should be able to run them clean
but there are some roms that will need to be patched for SRAM for them to work properly you can use GBA Tool Advance to do that

(also as far as i know you cant save with gba roms if you boot them from the scdsone)

log in for attachment

is your scdsone a SDHC version?? if it is you can use YSmenu which lets you boot gba roms from your scdsone to your sclite & works much better than the scdsone menu at doing it

[dantheman]

For the ones that have a garbled "Nintendo" logo, it sounds like the header is broken.  Use GBA Tool Advance to fix the header.

[Tsukasa.Hack]

Thank you everyone for the help!   

At the end use option of JMR
Install "YSmenu" and now everything is going very well and now I can play most games for GBA.

Some do not work but proved to patch with the GBA Tools!

A 10 at all!