Search

[bigo67]

:cry: i apologize to anyone which already answer (probably many times) already to my questions but i'm new to this and i spend 3 days going thru this forum without been able to get out of troubles!

I have 2 DS (the very first ones) one bought in Dic last year in Hong Kong and the other in Europe back in March.

I purchase last week a Super card firmware 1.44 and a Super Pass.
i download the SuperCard program ver. 2.43
i got a 1gb compact flash card

here is whati'm doing:
Step one i did reformat the CF to FAT instead of FAT32.

i load a XXXX.nds file to the above program i run the conversion and got a new file with XXX.nds.dsi
I load this one into my CF.
i insert the Superpass with an original DS game (WarioWare Touched) and the supercard with the CF.
And When i turnthe DS on i get just white screens!!!!!!!

I do not know if i'm missing something or am i doing something wrong!?

Can someone be so kind to help me out??

I hope all of this does make sense......sorry for my English.

Greeting from Spain!

Bigo
[/b]

[Koji]

Besides getting the latest conversion software, you also need to upgrade the firmware on the supercard to the latest version.

[bigo67]

Thank you for your reply.

i did try to upgrade to 1.5 version but it always give me a message like...." this version is not compatible" or something like that....is there a link which i can use for downloading the right one?
....and is it just load it to the CF and run it into the DS??

thanks!!

[Koji]

You need to download the full 1.50 patch then upgrade to 1.52 then 1.53.

You can get them from the download section. The 1.50 should be a .bin file. Load up the super card in GBA mode and run the .bin file as if it was a GBA rom. After you do that, the 1.52 and 1.53 upgrades should automatically ask if you want to upgrade or not.

[socket]

You definately need to upgrade the firmware.

Make sure you are getting the correct version, CF or SD.  You mentioned your CF card, so I assume you are using the CF version.  

If you have trouble upgrading, try upgrading incrementally, I know some people had trouble going directly from 1.44 to 1.52 when it came out.

Go from 1.44 to 1.5,
then go from 1.5 to 1.52,
then from 1.52 to 1.53.

See if that works.  GOOD LUCK!

[memyselfandi]

but don't put them all at the same time on the cf card, do one by one just to be safe :idea:

[bigo67]

Hi everyone,

Thanks for all your help!

i did update the firmware as told to V 1.53.

Now i do see and play certain games but many other i do get white screens!

is it due to bad roms or is it something else??

Thanks again!!

Bigo