• Welcome to SCdev.org. Please log in.

Welcome to the new SCdev forums!

Help with superpass 2 plz

Started by f37u5, February 18, 2006, 08:08:02 PM

Previous topic - Next topic

f37u5

I have searched forums for the solution to this problem but can not find it.  Everytime I try to program the SP2 i get the error saying Hardware not attached. I have checked bios to see if my settins are correct. From what i have found on the forums i have them set correctly. Any help would be great.

Thanks in advance

bitblt

Did you power the programmer with a USB cable?  Try different LPT bios settings . . .  trial and error cant hurt.

2die4

also check the write protect switch on the SuperPass 2 is clicked towards the middle so you can program it.
S Lite (white)
R4 v1.09 (white) with 1gb Kingston microSD (Jap)
EZ flash V 3-in-1 (white)

Brando

I had the same problem with my superpass 2.  No matter how i tweaked the port settings it just wouldnt work.  Then i tried it on my friends computer and it worked right off the bat.  I think the superpass just isnt compatiable with certain parallel ports, so you might want to try another computer.  Hope this helps...

petecchia

I had the same problem too, tried 2 different computers one running XP and the other 98SE and 2 different USB leads, same result.

I was able to test a replacement before I accepted it and it did the same on the seller's computer when he tried it, finally third time lucky a third SuperPass2 worked fine on his computer.

Maybe there has been a bad  batch of SuperPass2 that did not work that have been sold, 2 in a row did not work at all, its a bit of a coincidence no?

Bad luck, try and get a replacement and get the seller to test it (maybe program it for you if he is nice) before despatch.
nimal Crossing: 2105-2495-9040 Name: Max Town: Pisa
Mario Kart DS: 382323-521347 Name: Max2
Tetris DS: 748499-940981 Name: Max2
Metroid Prime Hunters: 1031-5064-9387 Name: Max2
GMT 0 (UK)

f37u5

Thanks for the response, guess ill try my buddies computer and if that does'nt work ill see if the seller will replace. Was starting to wonder if I was doing something wrong. Thanks again.