PROBLEM! ! ! !

splatman · May 20, 2006, 06:42:30 PM

Hi every body ife got a problem

when i turn my DS on with Supercard CF either with amd with out the CF in it i Get 2 White screens how can i fix it ? :oops:

bitblt · May 20, 2006, 08:16:16 PM

Does your DS still work without supercard in the GBA slot at all?

splatman · May 21, 2006, 10:19:57 AM

yes

bitblt · May 21, 2006, 11:00:12 AM

Look closely at the CF contacts inside the SC. Is there a bent pin. Did it ever work in GBA mode?

splatman · May 21, 2006, 11:39:36 AM

there's no bented pin but if i but a normal GBA Game in it then GBA game works whats wrong with my supercard

:S

bitblt · May 21, 2006, 10:42:30 PM

Did it ever work? Try a different CF card.

splatman · May 22, 2006, 09:17:02 AM

yeah it did ever work and it doesnt matter wich CF i put in it because without the CF card in the Supercard il get 2 white screens as wel

ratx · May 22, 2006, 09:50:13 AM

The SC firmware is probally duff then. You can either try to reflash it ( I belive you need a working "wifime" wifi card ) or buy a new SC...

splatman · May 22, 2006, 11:50:41 AM

ok il wil try it thx for the help

tdtd · June 06, 2006, 10:32:14 PM

I have the same problem, and everytime I need to use it I had to blow on the contacts (I know I shouldn't do that because of the moisture). It works for a while until I need to switch games (A+B+X+Y+R+L) then it fails. I have to take it out again and blow just to make it work. Not sure if it's the supercard connection problem or not. The pins on the green board into the DS looks pressed down a bit.

bitblt · June 07, 2006, 01:24:30 AM

Do you have SCCF or SCSD?

darkuni · June 07, 2006, 01:29:54 AM

What are you using to bypass protection? MML? Flashed DS? Passmez?

tdtd · June 08, 2006, 10:04:48 PM

Quote from: "bitblt"Do you have SCCF or SCSD?

I'm using the CF version.

tdtd · June 08, 2006, 10:09:43 PM

Quote from: "darkuni"What are you using to bypass protection? MML? Flashed DS? Passmez?

I already flashed my DS. The SC worked fine before but then lost connection one day probably because it was crushed by some things while in my bag and pushed the green board down. Didn't attempt to open the SC in case it can't be put together. I bought another SC CF and it's working fine right now.

bitblt · June 09, 2006, 01:54:00 AM

Quote from: "tdtd"
Quote from: "bitblt"Do you have SCCF or SCSD?
I'm using the CF version.

Sorry, dumb question.

Are you sure nothing is bent? I think you should consider opening your SCCF case and have a closer look. That way I took apart my SCCF was to use a carpenters knife to carefully split one side of the SC case. Then with a two more small cuts on the opposite side of the CF case you should be able to slip out your SC PCB (green board) without completely separating the case. The PCB will slip out as one solid piece. Then you can better examine the PCB. When finished you can slip the PCB back into the shell and test it again. Your problem might be something simple.