DS Lite firmware not recognized by flasme V7?

DisasteR · May 15, 2006, 09:07:32 AM

I have two Lites, one of which (is a navy blue lite) has a firmware version that is recognized by flashme v7 and so I have successfully flashed it.

The other Lite (a white one) however gets a message warning that the firmware is not recognized!?!

Have the different colour lites got different firmware or is my second one of a batch with a newer firmware?

Anyone know if there is a flashme v8 on the horizon then?

m2pt5 · May 15, 2006, 12:33:44 PM

Quote from: "DisasteR"The other Lite (a white one) however gets a message warning that the firmware is not recognized!?!

Do the pictochat test (eject a DS game while in pictochat) and post what color you get.

DisasteR · May 15, 2006, 01:00:11 PM

It is magenta...

I am using a passme 2 btw.

DisasteR · May 16, 2006, 04:11:14 AM

So nobody has had this problem when trying to flash a white lite with flashme v7?

ratx · May 16, 2006, 04:22:32 AM

yes someone else reported having the same problem. There is a thread about it here somewhere. They reported being able to install V7 despite the warning with no problems.

DisasteR · May 16, 2006, 04:38:47 AM

Cheers, Ive had a search but couldn't find the thread. Will look again now!

ratx · May 16, 2006, 04:40:44 AM

I was feeling lazy before

http://www.scdev.org/forum/viewtopic.php?t=3738&highlight=

vtr4423 · May 20, 2006, 12:58:21 AM

is any one has photo about short sl1 for ndsl ?

ths

DisasteR · May 20, 2006, 08:28:01 AM

Thanks ratx! Flashed it with no problems

petecchia · June 02, 2006, 07:39:54 PM

My Navy Blue DS Lite gave me the same firmware warning when I flashed with V7, I ignored it and went ahead. All works ok with me aswell.

Dudu.exe · June 03, 2006, 11:14:32 AM

I really want to put my hands on a DSL ... =/

vtr4423 · June 11, 2006, 09:33:18 PM

I just flash my new ds lite. white austrailian version. give me waring firmware, i ignored it. press start button and flashed with v7. work
perfect. i use 5.64" drill bit to short sl1 with insulation . :lol:

q_armando · June 11, 2006, 10:35:10 PM

Same thing with my new US DSL.
Didn't recognize the firmware but flashed fine with v7.
I used a bent paper clip covered with scotch tape all over but at the very end.

CptanPanic · June 12, 2006, 11:29:33 AM

Same here, flashed with warning. Are you able to change brightness levels?

q_armando · June 12, 2006, 12:09:45 PM

Quote from: "CptanPanic"Same here, flashed with warning. Are you able to change brightness levels?

Yes.