• Welcome to SCdev.org. Please log in.

Welcome to the new SCdev forums!

How to Skin the Supercard Menu - Discontinued

Started by arcc, October 11, 2006, 06:31:34 PM

Previous topic - Next topic

Echo49

Quote from: "dai_uk"
Quote from: "tomrulez"it's ok i have a friend with a ds but i dont no if it is wifime compatable, on a plus side we now no that it dont work with the 1.7 f/w so no1 else will brick there supercard, i will have a look round to see if i can find any info on how to unbrick ya supercard or if any 1 can point me to any info that would be helpful thanks tom

Am I right in thinking that if your friend or you have used flashme then the DS will be wifime compatible, I have an older Phat DS so used wifi me to flash mine rather than use a super key / pass me - just in case that bricker ever slips into something I use !

you don't have to flash your ds before it is wifime compatible, or how would you be able to flash your ds using wifime?

Devil_Spawn

It is flashing your ds that can make it WMB compatible, not wifime

tomrulez

i have a version 2 ds so i no that mine is wmb compatible, can i send programs via wmb to load the flashmp.nds on darkfaders site, if so how would i do this i have a rt2500usb and i cant get the tut on scdev to work with my wireless stick to wmb can any 1 help me.
thanks tom

Devil_Spawn

i seem to remember that usb is not supported unfortunately

tomrulez

it is in linux i think, there a tut on how to wmb/wifime on this forum.
but i keep getting a error saying failed to setup my sockets to the outside world, ive did every thing right but it wont work any 1 that has any knowledge in wmb/wifime for the rt2500usb sticks please help me. thanks tom

dai_uk

Quote from: "Devil_Spawn"It is flashing your ds that can make it WMB compatible, not wifime

Phew thought i was going mad, older DS's will run multiboot / wifi me on Original firmware, anything else needs to be flashed before wifi will work.

Which is why I suggest anyone with a DS flash it, not so sure about the Lite's due to the chance of hitting that screw and messing them up
Damo

Echo49

No. ALL DSs are WMB compatible. Only versions 1-3 are WiFiMe compatible, ie. to boot up your flash cart, but you can send any official demo to a DS of any version.

tomrulez

can i send the flashmp.nds to my ds via wifi,when i tired it crashed on loading the program, it was all messed up when downloading it off the pc, is there any other way.

Devil_Spawn

Quote from: "tomrulez"can i send the flashmp.nds to my ds via wifi,when i tired it crashed on loading the program, it was all messed up when downloading it off the pc, is there any other way.

this should work if u have flashme installed on ur ds

tomrulez

i dont have flashme i have the official f/w that came with my ds so am i out of look with out buying any new hardware or sending my supercard off to be fixed

nitram100

Hi guys, i was wondering if somebody could help me. I followed the tutorial for skinng the supercard interface, when i selected it L+R and up on the d pad for the corresponding firmware it froze on "erasing!" so i left it for an hour and ended up having to turn it off, now the supercard doesnt load anything up :( any ideas what i can do? i have all the superpass 2 gear if thats any help?

Thanks in advance for any help!

I have 2 x Supercard SD's and a SuperPass 2 device, can i conjur something up with this equipment?

:(

arcc

Quote from: "nitram100"Hi guys, i was wondering if somebody could help me. I followed the tutorial for skinng the supercard interface, when i selected it L+R and up on the d pad for the corresponding firmware it froze on "erasing!" so i left it for an hour and ended up having to turn it off, now the supercard doesnt load anything up :( any ideas what i can do? i have all the superpass 2 gear if thats any help?

Thanks in advance for any help!

I have 2 x Supercard SD's and a SuperPass 2 device, can i conjur something up with this equipment?

:(

Just nab the unmodified flashmp friom http://darkfader.net/ds// and load it up with your unbricked supercard, once you got it loaded, quickly swap out supercards to your bricked one, then press the buttons  to flash.

arcc

The power supply in my puter went boom. Should Dr.Katts not get an updated version by the time my new PS comes in, I will ask if I can have the source code.Then perhaps see if nickman and pixelk can help me figure out that bottom screen.

I asked darkfader a while back for the source to flashmp, but have yeat to hear anything from him.

Mc Nasty

I am working in it but there are some errors that I need to correct since there are enough changes in the structure of the firmware that I need to study attentively (all this so that there are not errors and be safe their use)  
I will have them soon news
he power only is evil in the mistaken hands
El poder solo es malo en las manos equivocadas

ElBobino

are you guys still trying to get firmware v1.70 working? I can see if I can help, I've mucked around with graphics in firmwares a bit for PC BIOSes and Linksys Firmwares.

Are the graphics encoded differently in the v1.70 firmware? I honestly haven't tried to dump my firmware yet (it took a looong g'damned time to get my SC Lite, don't want to brick it just yet).

Have you have any success modifying the SC Lite firmware?

I've pretty much exhausted all the physical modifications I want to do to the actual SC Lite Cart (pics forthcoming) so I'm keen to hack up the menu graphics, especially with how nice the v1.70 menus look!
color=navy][size=8]_______________________[/size]
[size=9]B[/size][size=8]OND[/size][size=9] V[/size][size=8]ILLAIN IN [/size][size=9]T[/size][size=8]RAINING[/size][/color]