• Welcome to SCdev.org. Please log in.

Welcome to the new SCdev forums!

Save Saver Problem

Started by ASHFIRE, April 27, 2008, 05:22:52 AM

Previous topic - Next topic

ASHFIRE

Hi

Hi to everyone and thanks for the any forthcoming advice.

Im brand new to using the DSone card and have recently got the save saver error. The card was bought around 2 weeks ago. Im using a Kingston 1 gig card.  Ive searched through the forums but it turns out im a complete noob, and need a step by step guide.

Things i have tried are L,R and UP. Everything is ok but it does say sd ok! no find test file, at one point. psram is ok. English Version 1.01.

I havent had chance to check the card on another DS.


i hope that enough info to at least point me in the right direction so the family can play the DS again

thanks

Jon

Iwan

which Supercard are you using? is the flash card formatted with FAT or FAT32? is the saver size set to 512k?
Hamid: What's that?
Rambo: It's blue light.
Hamid: What does it do?
Rambo: It turns blue.

ASHFIRE

#2
thanks for the reply.

ive formatted the card with both FAT and FAT32 and installed the latest OS from here http://eng.supercard.cn/download.htm

the card is a DSONE SDHC

when booting up the card goes straight to the save saver error, i cannot access any of the options, or switch screens. The Original games will still work.

edit :  ive removed all the files except the scshell and the msforc thingy   and it still has the same error. 
I have noticed that if i hold select at boot up it does bypass this, but i cannot use the hotkey L+A to access the saver, other, option or help section

jmr

ive had this happen to me a couple of time what ive done is just back up my files & do a format then put a clean copy of the loader back on my cart & it fixed it

ASHFIRE

please dont laugh too hard


by loader do you mean the OS and the MSFORSC.


if so i have done this, if not then please let let me know how :)

jmr

by loader i mean the scshell folder & MSFORSC.NDS

ASHFIRE

ive reformatted it again, twice for good measure as FAT32

i redownloaded the files above and put them in a new folder so as not to get them mixed up.

Still get the save saver error...

tomorrow ill try using my SD card in another DSone card and use my DS and see what happens

jmr

do you have a screen protector on?

i read a post once were the screen protector was causing the screen to be constantly pressed & was causing the Save Saver Problem!!??

Alfadir

This is your DS that have a problem not DS One.

It's a button who is always pushed or the touch screen with a permanent contact.

Remove the protection of the touch screen if you have one and test the R and L button (the one who have the most problems).

ASHFIRE

Thank you so much!!!!

I pressed all the buttons but they worked, then i used my thumbs on the touch screen to press it in while giving the DS a shake, not too technical, and i didnt hold out much hope but when i turned it on it worked perfectly


Thank you both so much for helping and having patience

teaman

Congrats on getting yours to work again! but I'm having the same problem and i don't know how to fix it. Please help?
The situation is the same is yours too.

Any sugestions?

Thanks

Slingshot

L+R shoulder buttons can often get stuck on some ds-lite, the usual technical cure is to 'blow' in them... maybe try that?

teaman

thanks

i immediately tried it but unfortunately it didn't work, thanks anyway. =)