Supercard lite stuck in gba slot

rocky · July 31, 2006, 05:33:37 PM

Not sure if this has been talked about but I just got my supercard lite today and when I put it in it was very hard then i tried taking it out but I couldnt. It was in there so hard I had to use a screw driver and pry it out. has anyone else had this problem? it comes out alot easier on the left side like supercard.cn says

Altor · July 31, 2006, 06:06:51 PM

Have you used a SCCF? If so, would you say it is more or less stuck than they get?

johnny9562001 · July 31, 2006, 07:37:23 PM

yeah, samething here its very stuck in there. i also had to use a flat screwdriver and also the microsd is very loose. what did i do? well i just fold up some paper and stuck it in with the microsd, now its very tight and safe. last, i sand my SC lite and that made it come out smoothly.

sneef · July 31, 2006, 07:54:45 PM

yep. that's what i was saying. I had to file it down. Now it slides in and out almost as easy as g6Lite. especially had to shave the sides, and the back of the cartridge. the dust cover (and the g6lite) is actually beveled on the back side, but the supercard lite is not. I had to shave it down to match, and now it's quite ok.

KINGOFNOOBS · July 31, 2006, 08:10:44 PM

you suppose to put it in a little bit then push left side, then right, and contiune until its completely in. you dont suppose to put it in a like a normal cart

sneef · July 31, 2006, 08:18:05 PM

i know. but it's still hard to remove. they didn't make it that way on purpose, it's a manufacturing error.

Altor · July 31, 2006, 09:23:33 PM

Would suck if the front broke off. You'd have to mangle the thing to get it out of there.

Fortunately I don't have any plans or foresee to ever remove my SCL once I get it

rocky · July 31, 2006, 10:15:02 PM

I would leave it in their but I have my m3 I use for movies and I need to remove it alot so I think I will try using my extra gba dust cover and cut a hole in it but that might be alot of work if you look at the inside of the supercard lite.

johnny9562001 · August 01, 2006, 04:10:05 AM

i tried it, trust me dont even bother it wont work. i manage to make it fit inside but i dindt manage to make the microsd slot hole and hold it onto the frame, since you have to somehow make to holes gor the screws. it would look nice and better but its something to hard.