• Welcome to SCdev.org. Please log in.

Welcome to the new SCdev forums!

How to flash your Supercard DSONEi

Started by Zorlin, September 19, 2009, 04:39:12 PM

Previous topic - Next topic

Zorlin

Hey everyone! I had some trouble figuring it out and kept looking for a flashing utility etc.

Upgrading is actually pretty simple.

1) Grab the latest firmware from the Supercard website. It will be in a zip file. Extract it so you get the .bin file.
2) Copy the .bin file to the root of your microSD card.
3) Plug the microSD card back into the Supercard DSONEi, and then insert the DSONEi into the firmware writer. Plug the firmware writer into a USB port somewhere.

It will take "about 8 minutes" to flash according to SC's website. Give it about 15 or until a minute after the light stops flashing. And that's it!

Good luck.
~ Zorlin

KingAlbert

Thanks for posting this here.  This was the first place I found for flashing the firmware on the DSONEi.  It wasn't until later that I found the procedure in the pamphlet that came with the SuperCard as well as a link on the home page under Tutorial. :)