• Welcome to SCdev.org. Please log in.

Welcome to the new SCdev forums!

Problem with Flasme (V1 DS+Supercard minisd v1.62+SuperPass)

Started by Banana.Monter, June 13, 2006, 08:37:28 AM

Previous topic - Next topic

Banana.Monter

I can boot games using the passme but if I try to open flashme.nds the top screen goes white and the bottom screen goes black and both are compleatly blank.
ig removed, too big :'(

ratx

Hmmm that sounds odd.. the latest version of flashme should run on SC. Have you tried prepending the ndsloader.bin? try running it through my homebrew patcher? will tell you what type of file it is... ( http://l33t.spod.org/ratx/DS/SC/scmhbp )

cheers[/url]

Banana.Monter

It says the ndsloader was found in the flashme.nds, then it spat out flashme.sc.nds, but the same thing happens when I run it. I also have an EZFlash 3 but I havnt been able to get it working on that either.
ig removed, too big :'(

ratx

hmm does it also mention its a "fixed" nds file? have you tried running any other homebrew? you're not patching it with the Supercard patcher are you?

Banana.Monter

The flashme is the one from the official site (Down ATM) I have tried it straight away on 1.6, on 1.62unpatched ran through your thing and ran it, and then ran through sc patcher (As a final resort) and still notheing.
ig removed, too big :'(

ratx

I would try some other homebrew, see if you can get that to run to help isolate the problem... also if you are able to get the checksum of the file it might help... the md5 of the latest flashme is

fa220267edb05f4386025d97e2168f3f

Banana.Monter

ig removed, too big :'(

ratx


Banana.Monter

it says 0762f6957fcfb3a942f2474a1a2383a2 *flashme.nds
ig removed, too big :'(

ratx

That matches the checksum of the flashme on the "infamous" mirror site ( contains an old version ) Although I've personally tested that version and it boots ok... I would try some other homebrew and/or another version of flashme from eg here

http://tinyurl.com/h2cgf/

Banana.Monter

ig removed, too big :'(