Search

[skx]

**WARNING**BAD**ENGLISH**Sorry, it is not my native language =) thx
Hello,

I got a imported JAP NDS,
half a year ago, i bought me a SuperCard CF(I had to cut it down till it fits in the slot of my NDS), everything worked fine for one month, movies..gba... and so on...

after a month I got a white screen in the upper screen(after the GAMEBOY startup).
second screen keeps black...

Well, my NDS recognizes that there is a GBA Card inserted..but thats it.

Since flashme and some new infos about using CF + Flashme came up,
im know interested again..

My Question are,
1. has anyone information on Chip-Design?
2. can I solder a bridge ore something else that could do the trick?
3. Can I flash my SC on a other way than with compact Flash card?
4. Is there a way to do a hardware reset on the Card?

well, i often posted question in the official Forum, but nothing happens..
you know..they always say "polish the pins ...etc..."

As I had to cut it down, i had no gurantee anymore.

They know that they have some failure SC (chips, ram, rom...or whatever) but they will not admit it. poor!

thx 4 reading and reply =)

[stupid2ass]

Make sure it's making contact with the DS.  Mine gets pushed up each time so the contact is poor.  I had to push it down (check the bottom where it is supposed to connect with the DS and make sure the contacts are not hiding behind the plastic cover).  Since I manually push it down, it's been working ok.

[skx]

Thx for posting back =)

well..i tried hard..but this is not my problem ( i think) .

I also shoved (sharpend?) my SC Case down..but, what do you think, how far should the pins came out of the case?

[skx]

Okay, i pushed the PCB only in to the GBA slot, but there is still the same problem.

I think that the Flash is corrupt. I am  looking for a way to reset or test the flash of the SC.

[cory1492]

when you turn it on (or launch the SC from DS menu), do it holding the 2 (R+L) shoulder buttons and that should run a diagnostic on the cart... of course, if its really messed it may not start even that.

You sure your CF is formatted to FAT and not FAT32?

[hailrazer]

Most of the time the problem is that you bent a pin when you pushed the CF card into the Supercard.

Look in the SuperCard and see if there are any bent pins and if there are use a small screwdriver or tweezers to straighten it.