• Welcome to SCdev.org. Please log in.

Welcome to the new SCdev forums!

is my SC MiniSD brick? - HELP

Started by jankiel, January 15, 2007, 03:58:39 AM

Previous topic - Next topic

jankiel

Hi,

Unfortunately it seems that my SC MiniSD died during upgrade firmware.
I had firmware 1.63 and unnecessary I decided to upgrade it to 1.70.
I loaded upgrade bin to SD, started it, all percentage went to 100, and .....that was all. No Finish, done, reboot info...just white screen...;(
:cry:

After reboot NDS did not start with SD menu, just run with default NDS menu.

I've tried to reflash it with flashmp.nds, but it recognize my CS, erase it, but then just info "Programming 5xxxxx Bytes" appears and... nothing more.. :cry:

I had very similar situation with upgrading to 1.63, but in that case reflashing with flashmp helped. Now I've tried many times to reflash and nothing.

Is this really end of my SC??

Thanks in advance for your help.


Best regards,
chrisjan

Hi

It sounds like your sc is bricked... you could always send it to bitbit. He has a recovery servace. To lazy to give a link but for more info the thread discussing this is in the marcketplace.
_______________________________________