Search

[Mikeypr]

Just got a Supercard Lite (Rumble) and what ever I do I cant get anything to work. Just get two white screens.

I have tried updating the firmware but it cant see the .bin file.

The card boots up OK, but as soon as the screen says loading I get two white screen, It does not even get a chance to load.

I have installed the latest supercard patching software for the Micro SD, and have this installed in a totally different directore on the PC, that I have the patching software for my standard SD SuperCard Patching Software.

I'm totally lost as to what it could be...

Reformatted the memorycard, patched the same file in every way I could.  Still nothing.

Any Help Appriciated

[Rayder]

Are you trying to run GBA or DS games?  The Rumble version has no internal memory for GBA games.  GBA games are not possible to run in that card.

For DS games, maybe you need the latest .dat file to replace the one in the patcher install path. It sounds like the file you patched ended up as a zero-byte file after running it through the patcher. Get  the "Update(2007.02.22):SuperCard Slot 2 NDS Patch" released here:

http://eng.supercard.cn/

For DS games, you need some kind of Passme device in the DS slot so the SC Rumble  comes up in dual screen mode before it will run DS games.

[Mikeypr]

Thanks for the info but no luck.

I'm trying DS games fron number 1 all through my collection and they ALL white screen.

I AM using a Superkey (Latest Ver)

File sizes are correct I think. NO Zero byte files.

I have uninstalled ALL other SD Version software and reinstaled the sdmicro version... Nothing.

Any Further advice welcome.

Mike

[kkan]

Just got a Supercard Lite (Rumble)

I have tried updating the firmware but it cant see the .bin file.

this is your problem you don't use the .bin file update

the file you need is the UPGRADE.scu FILE  

get it here

[Mikeypr]

Hi there, Thanks for the reply.. But Sadly no help.

While I was waiting I tried it and the card was already up to date. Flashed it anyway, Just in case.

Still exactly the same.

I now think the Memory or SC is iffy.

Thanks For Trying

[bagster]

Just got a Supercard Lite (Rumble) and what ever I do I cant get anything to work. Just get two white screens.

I have tried updating the firmware but it cant see the .bin file.

The card boots up OK, but as soon as the screen says loading I get two white screen, It does not even get a chance to load.

I have installed the latest supercard patching software for the Micro SD, ...

You need to use the Rumble version of the supercard software, not the microSD one...check for the link in the download section

[kkan]

Hi there, Thanks for the reply.. But Sadly no help.

While I was waiting I tried it and the card was already up to date. Flashed it anyway, Just in case.

Still exactly the same.

I now think the Memory or SC is iffy.

Thanks For Trying

are you patching the games first to hard drive then transfering them over to the mem card not trying to patch the output directly to the card !?

a good tip is once patched copy/move the output files.. both the .dsq file and the .save file for each game into to a new folder and name the folder the same name

and as above use the 2.58 patcher for MICRO SD and not MINI SD  

Also make sure when you format the mem card that you format it to FAT 16 and not FAT 32 as FAT 32 does not work in the supercard